Vimocity Work Standardsfor construction and building services

Reduce rework and risk across every jobsite.

We work with your experts to define the right way to do the job and film it with your crews. The Vimocity platform makes it accessible and deliverable through the tools they already use.

Two installers in fall-protection harnesses carrying a solar panel across a roof
Task stepTie off to the anchor before you carry panels
Hazard at this stepOpen roof edge: keep your lanyard clipped in
CheckHarness, gloves and safety glasses on
Improve quality Critical steps and checks made clear
Improve consistency One standard across every jobsite
Support safer work Hazards and controls at each step
Close experience gaps Senior know-how for every crew
The gap we close

From the standard on paper to the work on site.

Your procedures and safety requirements already exist. The gap is getting them to teams in a form they'll actually use. When the same task gets done differently from jobsite to jobsite and worker to worker, you get rework and risk.

The expectation
What you've defined
Install procedures
Equipment specs
Safety requirements
Field know-how
Vimocity
Learned before the job, reinforced on site
Short videos crews can rewatch
Step-by-step visuals
Hazards at the step
Quick checks before the job
The gap
Where standards get lost
Long SOPs read once, then left in the trailer
Know-how held by a few senior techs
Each crew's own way of doing it
The execution
How teams do the job
Jobsite ADone right
Jobsite BDifferent sequence
Jobsite CMissed check
Rework and risk
Jobsite ASame standard
Jobsite BSame standard
Jobsite CSame standard
Consistent, safer work on every jobsite
What's inside a standard

Everything for the task, in the order the job runs.

Install procedures, equipment specs, safety requirements, and field know-how in one place, shown on video from your own jobsites.

Technician on a stepladder rigging a chain hoist above a vault cover, with cones set around the work area
Technicians checking the inside of a vault before entry
Two techs at the vault opening lowering a chain hand over hand
Technician in a harness on a retrieval line inside a vault
Technician kneeling to seat the vault cover back in its frame inside a taped-off work area
Step 1 of 5 · SetupCone off the area and rig the hoist before you lift the lid
Step 2 of 5 · SequenceTest the air, then ventilate the space
Step 3 of 5 · TechniqueLower gear hand over hand, one tech on each side
Step 4 of 5 · Hazards and controlsStay clipped to the retrieval line the whole time you're inside
Step 5 of 5 · ChecksSeat the cover flush before the barricade comes down
Watch the overview

Your experts know the work. Now everyone can see it.

When you need to fix an appliance, a short how-to video is often more useful than the manual. We apply that same idea to work standards.

In the flow of work

Right where the work starts.

Standards plug into the systems and channels your teams already use, from the morning huddle to the jobsite to the training room.

Toolbox talksWalk the crew through the steps and hazards before the job starts.
Safety meetingsUse the video to start the conversation about what good looks like.
Vimocity
Service & maintenanceMechanical & plumbingCommissioningElectrical
Technician checking a fan motor mount from below Work standard Fan motor preventive maintenanceLocked out, belt checked, guard back on.
Step 3 of 5 Check the motor mount Confirm the bolts are tight and the belt guard is seated. Lock out and tag out before you reach in. Done right?No rub, no loose bolts, guard secured.
Technician running a functional test on a VAV box from a scissor lift1:48
CommissioningFunctional test on a VAV box
Plumber hanging pipe from a scissor lift2:15
Mechanical & plumbingHanging hydronic pipe from a lift
Technician entering a vault on a retrieval line1:32
Service & maintenanceSump pump service in a vault
Delivered through the systems you already use
Technical trainingTeach new apprentices and techs the agreed method from day one.
Before a taskCrews pull up the standard before a job they don't do every day, so every step, check and hazard is fresh.
Who uses it

One standard. Three teams aligned.

Each team gets what it needs from the same reference, so what teams hear matches what they see.

Operations
Cut rework and get every jobsite building to the same standard.
A version of the standard that matches how your crews really work.
Morning huddlesNew jobsitesScope changes
Training
Turn your best techs' know-how into a standard every apprentice can learn from.
Visual material that carries past the classroom onto the jobsite.
OnboardingNew hiresLMS
Safety
Put hazards and controls in front of teams at the exact step they apply.
Fewer separate safety documents. The controls live with the work.
Safety meetingsPre-task plansIncident reviews
How we build it together

Built with your experts. Ready for every jobsite.

Every standard is built around your procedures, equipment, and people. We bring the process, the filming, and the platform.

Your SME council approves Access for every team We keep it current
01Choose the tasksPick work where inconsistency drives risk or rework, and form your SME council.
02Define it togetherWork through setup, sequence, technique, hazards, and checks with your field experts.
03Film and validateWe film on your jobsites with your crews. Your SME council reviews and approves.
04Put it to workYour crews get access on the Vimocity platform, and we keep it current with version control.

Which tasks would you start with?

Pick the work where consistency matters most, from rooftop installs to confined spaces to the mechanical room. We'll help you build your first standards.

Pipefitter in a welding helmet and gloves welding a pipe joint on a pipe stand